Pass & Seymour 2097-NABL radiant Duplex Self-Test Tamper Resistant GFCI Receptacle With Alarm, 125 VAC, 20 A, 2 Poles, Blue

Downloads

Resources

Features

Features & Benefits

• Feed-thru wiring configuration allows GFCI to protect downstream receptacles.
• Side or internal screw-pressure-plate back wire with #10-#14 AWG solid or stranded copper wire.
• Trip Time: 0.025 sec. nominal per UL Standard
• Thinner than competitors' GFCI Receptacles: leaves more room for wires in the box.
• Class A rated GFCI.
• Exceeds UL 943 voltage surge requirements; survives 100x the required UL 3kA/6kV voltage surge test cycles.
• 20 Amp feed-thru capacity
• Two back-wire holes per terminal.
• Meets 2015 UL requirements.
• Dual-direction test and reset buttons.
• Auto-Ground clip assures a positive ground to metal box.
• Supply Voltage: 125VAC 60 Hz
• Mounting screws are shipped captive in the device and wall plate for easier installation.
• Trip indicator light (red LED).
• Supplied with matching TP wall plate (except NI AB and DB models).
• WR models listed to the Weather-Resistant supplement of UL498 meet demanding UL requirements.
• Protects children: patented shutter system helps prevent improper insertion of foreign objects (for Tamper-Resistant models).
• NAFTA-Compliant GFCI Receptacles are ideal for use on projects subject to the provisions of the Buy American Act.
• Supply Voltage Range: 102-132 VAC
• Conducts an automatic test every three seconds ensuring it's always ready to protect. If the device fails the test the indicator light flashes to signal that the GFCI should be replaced. It also has our proven SafeLock protection feature: if critical components are damaged and protection is lost power to the receptacle is disconnected.
• 10kA short circuit rating.
• High-impact-resistant thermoplastic construction.
• Meets National Electrical Code® Tamper-Resistant requirements (for Tamper-Resistant models).
• Trip Threshold: 5 +/- 1 m
• Ground screw has back-wire clamp for easy installation.
• Extra-long strap.
• Prevents line-load reversal miswire: no power to the face or downstream receptacles if wired incorrectly.
• Button colors match the device face.
• FSUL Listed (Federal Specification WC596).

Available Options

• NAFTA-Compliant TradeMaster®/Spec-Grade 20A Self-Test Duplex GFCI Blue
• NAFTA-Compliant Trademaster®/Spec-Grade 20A Self-Test Duplex GFCI Light Almond
• NAFTA-Compliant Trademaster®/Spec-Grade 20A Self-Test Duplex GFCI White
• NAFTA-Compliant Trademaster®/Spec-Grade 20A Self-Test Duplex GFCI Ivory
• NAFTA-Compliant Trademaster®/Spec-Grade 20A Self-Test Duplex GFCI Orange
• NAFTA-Compliant Trademaster®/Spec-Grade 20A Self-Test Duplex GFCI Brown
• NAFTA-Compliant Trademaster®/Spec-Grade 20A Self-Test Duplex GFCI Gray

Specifications

• Volts: 125
• Fed Spec Number: WC596
• CSA Listed: No
• UL Standard: UL498
• UL Listed: Yes
• Amps: 20A
• Federal Spec: Yes
• cULus: Yes
• NEMA Configuration Number: 5-20R
• Color: Blue
• Country of Origin: MEXICO

Videos