NCVT2PKIT Dual Range Non-Contact Voltage Tester with Receptacle Tester

SKU
2266695
More Information
Description The NCVT2PKIT from Klein Tools includes a dual-range non-contact voltage tester as well as a receptacle tester. The NCVT-2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables cords circuit breakers light fixtures switches outlets and wires as well as AC voltage in doorbells thermostats low voltage lighting and irrigation systems. Includes both visual and audible signals. The receptacle tester will troubleshoot standard 120V AC grounded outlets.
Brand Name KLEIN TOOLS
General Attributes

Downloads

Spec Sheet
Brochure 1
Instructions
MSDS

Features

  • Kit contains a non-contact voltage tester and receptacle tester
  • Dual range NCVT-2P automatically detects and indicates low voltage range and standard voltage (48-1000V AC)
  • NCVT-2P provides non-contact detection of standard voltage in cables cords circuit breakers lighting fixtures switches outlets and wires
  • NCVT-2P is a lightweight compact tool with pocket clip for convenient storage and quick access
  • CAT IV 1000 Volt rating provides expanded operation and protection
  • Screw-thread battery cap with O-ring ensures protection against dust and water ingress for the NCVT-2P
  • Receptacle Tester is designed to detect the most common wiring problems in standard receptacles
  • Conditions the Receptacle Tester indicates - wiring correct open ground reverse polarity open hot open neutral hot/ground reversed
  • Two Distinctive Modes on NCVT-2P: 70 to 1000V AC and 12 to 1000V AC

Warnings

  • Read understand and follow all warnings cautions safety information and instructions in the manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
  • Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling.

Specifications

  • Overall Height: 1.1" (2.8 cm)
  • Standard: NCVT-2P: CAT IV 1000V; RT105: CAT II 125V
  • Drop Protection: NCVT2P - 6.6' (2 m); RT105 - 3.3' (1 m)
  • Included: NCVT2P Dual Range Non-Contact Voltage Tester; RT105 Receptacle Tester; Instructions; and All Required Batteries
  • Voltage: 12 - 1000V AC
  • Pollution Degree: NCVT-2P - 2
  • Frequency: 50 - 500 Hz
  • Material: Polycarbonate
  • Type: Dual Range for NCVT-2P
  • Battery Life: 142 hr
  • Batteries: 2 x AAA
  • Ingress Protection: NCVT-2P - IP54
  • Weight: 1.7 oz (48 g)
  • Overall Width: 0.9" (2.2cm)
  • Application: Detects and Indicates Low Voltage and Standard Voltage; Detects Most Common Wiring Problems in Standard Receptacles
  • Overall Length: 5.8" (14.8 cm)
  • Item Height: 1.7500 in
  • Item Width: 5.1300 in
  • Item Depth: 9.6300 in
  • Item Weight: 0.2990 lbs

Videos

Weight 1.000000
UOM EA
UPC 09264469327
Manufacturer Klein
Material Polycarbonate
Material Polycarbonate
Height 1.1 in
Width 0.9 in
Catalog Number NCVT2PKIT
Country of Origin USA
Spec Sheet (5.17 MB)