Metallics JWDS2C Self-Drilling and Tapping Drywall Screw #8-36 3/4 in OAL Wafer Head Phillips Drive Steel Zinc Plated Self-Drill

Features

• 8 Diameter 3/4" Length
• Steel Zinc Material
• Wafer Head with Phillips Drive
• Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.

Additional Notes

• Other sizes and quantities available by request | There is no single standard for Wafer head dimensions. These values are offered as a guide; deviations from these specifications may occur. | This table is only a guide and does not constitute a warranty of any type .

Specifications

• Country of Origin: MUL
• Length: 3 in
• Width: 3 in
• Height: 2.15 in
• Weight: 0.56 lbs
• All self-drilling screws offer economical benefits: reduces labour and tooling costs; reduces or eliminates drill bits and taps
• Collection Folder: JWDS2C
• NPD Date Electrical: 2005-01-05T00:00:00.000Z
• MATERIAL: Steel Zinc
• Thread Type: UNF
• Division: Electrical H1
• Field Application: Electrical Plumbing Heating and Air Conditioning Industries
• FINISH: Zinc
• Sub-Division: Electrical-E H2
• PRODUCT FAMILY: Electrical Supplies
• Fastener Head Type: Wafer
• Pack Type: Jar
• Screw Point Type: Drill Point
• Product Weight: 254 g
• Product Width: 76.2 MM
• Product Height: 54.61 MM
• IGCC: 2756
• Torsional Strength: 42 lb-in minimum
• Product Series: WDS
• Material Standard: AISI 1016 - 1024
• NEURSPE: https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Wafer_Hd_Phil_Self-Drill_Tap_Dry_Scr.pdf
• Wafer Thickness: 0.025 - 0.035 IN
• Type: Type BSD Self-Drilling & Tapping Drywall Screw
• Thread Per Inch: 18
• PHILLIPS Recess Depth: 0.255
• Order Minimum Imperial: 100
• ARRA Compliant: N
• Order Minimum UOM Imperial: JR
• Fastener Length: 4-Mar
• Driver Size: #2
• Drive Type: Phillips
• PHILLIPS Recess Diameter: 0.176 - 0.189
• Hardness: Rockwell C32-40
• Language Code: EN
• Buy American Compliant: No
• Panel Thickness: 0.350 - 0.100 IN
• Product Length: 76.2 MM
• Fastener Head Width: 0.359 - 0.38 in.
• Thread Standard: SAE J78 - 2013