Metallics JTEKD22 10x2 5/16" Head #3 Drill Tek Screw 100/Jr

SKU
11320
More Information
Description These indented hex head self-drilling and tapping screws cut their own threads into a material without the use of a pilot hole. The indented head protects the drive area and reduces long-term wear. The steel zinc material provides superior corrosion resistance dramatically increasing the lifespan of the fastener.
Brand Name METALLICS INC
General Attributes

Features

  • 10 Diameter 2" Length
  • Steel Zinc Material
  • 5/16 Indented Hex Head with Hex Drive
  • #3 Drill Point
  • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.

Additional Notes

  • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Specifications

  • Country of Origin: MUL
  • Length: 3 in
  • Width: 3 in
  • Height: 3.6 in
  • Weight: 1.28 lbs
  • Collection Folder: JTEKD22
  • NPD Date Electrical: 2005-01-04T00:00:00.000Z
  • MATERIAL: Steel Zinc
  • Division: Electrical H1
  • Field Application: Electrical Plumbing Heating and Air Conditioning Industries
  • FINISH: Zinc
  • Sub-Division: Electrical-E H2
  • PRODUCT FAMILY: Electrical Supplies
  • Fastener Head Type: Indented Hex
  • Pack Type: Jar
  • Screw Point Type: Drill Point
  • Product Weight: 581 g
  • Product Width: 76.2 MM
  • Product Height: 91.44 MM
  • IGCC: 2778
  • Torsional Strength: 61 lb-in minimum
  • Washer OD: 0.384 - 0.414 in.
  • Product Series: JTEKD
  • Material Standard: AISI 1016 - 1024
  • NEURSPE: https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
  • Type: Type BSD Self-Drilling & Tapping Screw
  • Thread Per Inch: 16
  • Drill Point Size: #3
  • Slot Depth: 0.057 - 0.072
  • Order Minimum Imperial: 100
  • ARRA Compliant: N
  • Order Minimum UOM Imperial: JR
  • Fastener Length: 2
  • Drive Type: Hex
  • Fastener Head Height: 0.105 - 0.12 in.
  • Dimensional Standard: ASME B18.6.3-2010
  • Hardness: Rockwell C32-40
  • Slot Width: 0.05 - 0.06
  • Width Across Corners: 0.34
  • Language Code: EN
  • Remarks: The catalog UPC differ from the tarnsaction daat spreadsheet UPC
  • Buy American Compliant: No
  • Panel Thickness: 0.110 - 0.175 IN
  • Product Length: 76.2 MM
  • Fastener Head Width: 0.305 - 0.312 in.
  • Thread Standard: SAE J78 - 2013
  • Washer Thickness: 0.019 - 0.031 IN
Weight 1.280000
UOM JR
UPC 63972080360
Manufacturer Metallics
Color Silver
Material Steel
Trade Size #10
Diameter 3/16 In.
Size #10
Material Steel Zinc
Diameter 3/16 In.
Height 3.6 in
Length 3 in
Width 3 in
Catalog Number JTEKD22
Catalog (4.27 MB)