Metallics JTEKD13 10x1" 5/16" Head #3 Drill Tek Screw 100/Jr

Features

• 10 Diameter 1" Length
• Steel Zinc Material
• 5/16 Indented Hex Head with Hex Drive
• #3 Drill Point
• Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.

Additional Notes

• Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Specifications

• Country of Origin: MUL
• Length: 3 in
• Width: 3 in
• Height: 2.15 in
• Weight: 0.75 lbs
• Collection Folder: JTEKD13
• NPD Date Electrical: 2005-01-04T00:00:00.000Z
• MATERIAL: Steel Zinc
• Division: Electrical H1
• Field Application: Electrical Plumbing Heating and Air Conditioning Industries
• FINISH: Zinc
• Sub-Division: Electrical-E H2
• PRODUCT FAMILY: Electrical Supplies
• Fastener Head Type: Indented Hex
• Pack Type: Jar
• Screw Point Type: Drill Point
• Product Weight: 340 g
• Product Width: 76.2 MM
• Product Height: 54.61 MM
• IGCC: 2778
• Torsional Strength: 61 lb-in minimum
• Washer OD: 0.384 - 0.414 in.
• Product Series: JTEKD
• Material Standard: AISI 1016 - 1024
• NEURSPE: https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
• Type: Type BSD Self-Drilling & Tapping Screw
• Thread Per Inch: 16
• Drill Point Size: #3
• Slot Depth: 0.057 - 0.072
• Order Minimum Imperial: 100
• ARRA Compliant: N
• Order Minimum UOM Imperial: JR
• Fastener Length: 1
• Drive Type: Hex
• Fastener Head Height: 0.105 - 0.12 in.
• Dimensional Standard: ASME B18.6.3-2010
• Hardness: Rockwell C32-40
• Slot Width: 0.05 - 0.06
• Width Across Corners: 0.34
• Language Code: EN
• Buy American Compliant: No
• Panel Thickness: 0.110 - 0.175 IN
• Product Length: 76.2 MM
• Fastener Head Width: 0.305 - 0.312 in.
• Thread Standard: SAE J78 - 2013
• Washer Thickness: 0.019 - 0.031 IN