Lutron MS-Z101-WH Maestro Single-Pole or Multi-Location 0-10V Dimmer Switch with Occupancy/Vacancy PIR Sensor

Features

• Passive infrared sensors that automatically control the lights in an area
• These sensors detect heat from occupants moving within an area to determine when the space is occupied
• Combines a Maestro 0-10 V dimmer with an occupancy sensor
• Controls 1-10 VDC electronic fluorescent ballast or LED driver load types
• Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection
• 180 degree sensor field-of-view
• Up to 30 ft x 30 ft (9 m x 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft x 20 ft (6 m x 6 m) [400 ft2 (36 m2)] minor motion coverage
• Can be set to auto-on/auto-off or manual-on/auto-off
• Adjustable timeout (1 3 5 15 or 30 minutes)
• Adjustable settings for auto-on light level (occupied level): 100 % 50 % last light level or locked preset light level
• Adjustable sensitivity level: High med low min
• Off warning fades lights to off over a period of 10 seconds
• Advanced Maestro dimmer features available (locked preset fade-to-on and fade-to-off etc.)
• Adaptive switching algorithm for extended relay life
• Smart ambient light detection (ALD)
• Works with a single standard mechanical 3-way switch or up to 9 companion dimmers/switches
• High-end trim and low-end trim to adjust maximum and minimum light levels
• Selectable dimming curve-linear or square law
• Miswire and incompatible load alert

Standards and Certifications

• UL
• TITLE20
• TITLE24
• cUL
• Title 20/24 certified

Specifications

• Application: Lighting Control
• Body: Plastic
• Enclosure: Plastic
• Environmental Conditions: 0 to 90% humidity non-condensing. Indoor use only.
• Load: 8 A/0-10VDC
• Sensor: Yes
• Supply Voltage: 120 to 277
• Type: Occupancy/Vacancy sensor dimmer multi-location/3-way/single-pole 0-10 V
• Mounting: Wallbox
• Sensing Range: 900 ft2 (82 m2) major motion coverage/400 ft2 (36 m2) minor motion coverage
• Operating Temperature: 32 to 104 F

Downloads