Ideal 85-372J CAT5E F-T RJ45 Mod Plug

Downloads

Features

• Flush cut of excess conductors minimzes inadvertent contact outside of the plug
• Designed for best performance when used with the IDEAL FT-45™ Crimp Tool (30-495)
• Optional external strain relief boots are available.
• As conductors feed-thru the connector face all are visibly inserted far enough to be pierced by the pin below - eliminates short wires or opens.
• Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports.
• Permanent connection - once crimped they cannot be reused.
• Conductor order can then be verified before the connector is crimped. This elimates wasted connectors saves time in assembly and reduces the chances of finding an error during a wiremap test of the cable.
• Feed-Thru 8 position 8 contact RJ-45 modular plug for CAT5e 100Ω balanced twisted pair 100 MHz cables.
• 8 position 8 contact RJ-45 modular plug for CAT5e 100Ω balanced twisted pair 250 MHz cables
• Single piece connector no special assembly or multiple pieces simplify the modular plug assembly process - no measuring or exact cutting required.
• 50 micro-inch gold plating on contact mating area for long term reliability in connectivity even after hundreds of mating cycles.
• Designed to work seamlessly with IDEAL FT-45™ Modular Plug Crimp Tool. Also compatible for crimping (no cutting of conductors) in the IDEAL Telemaster™ crimping tools.
• Three prong contact design for use with solid or stranded 23-24 AWG insulated copper conductors up to 0.041" in diameter.
• NEW Feed-Thru design simplifies connector to cable assembly
• Accepts outer jacket cable diameters of up to .270".
• The cable can be pushed or pulled into the connector to ensure that the twisted pairs are within 1/2" of the pin contacts and that the jacket is seated beyond the primary strain relief for a secure connection-better NEXT performance minimal untwisted wires.
• Primary and secondary strain relief supports to retain cable jacket and minimize conductor movement once crimped.
• 50 micro-inch gold plating on contact mating area for long term reliability in connectivity even after hundreds of mating cycles
• The NEW IDEAL Feed-Thru CAT5e 8P8C (eight position/eight contact) modular plug connector is the first feed-thru style connector and tool solution to offer a flush cut of the excess conductor to the face of the modular plug. A patent pending design enables conductors to be cut flush with the end face of the connector when used with the FT-45™ tool (30-495). The flush cut eliminates inadvertent contact among adjacent conductors or with the mating jack. Conductor spacing is maintained for reliable performance in PoE and data applications.